Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 2 of 2 Posts

227 Posts
welcome to the evoluzione clutch pain in the ahh......first of all which bike do you have? Which weight are your primary and secondary spring?

I always get a lerchy first gear stunk noise with this clutch and I have a 999r. The fact that your pressure plate doesn't spin it means that the clutch is grabbing at neutral or when the clutch level is pulled in.

Since it is new, I would give it 200 miles to wear out the friction plates a little bit and see what happens. I also noticed that with an heavier primary spring (slipper spring) the clutch works better..I may actually go with a 80Kg now I have 70Kg stock is 60Kg

lemme know or PM
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.