Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 2 of 2 Posts

39 Posts
Discussion Starter · #1 ·
So all I need to fix my bike is a one dollar shim/washer that I cannot seem to find and my local dealer says 2-3 weeks?

Its 852.1.076.2A

It is a shim/washer that is .35mm thick and goes behind the starter clutch assembly, according to the manual between a "starter clutch needle roller bearing" and the "center bush"

Any ideas on a suitable replacement?

Thanks in advance..........
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.