Ducati.ms - The Ultimate Ducati Forum banner
1 - 1 of 12 Posts

· Registered
68 Posts
I had the same problem. I used my dremel to notch the bolt and used a flat head screwdriver after I broke the easy out bit trying to turn the bolt. In the end I broke the pillar off. The pillar sheered off at the hub. That bolt felt like it was welded in the hub. Luckily I was replacing the hub with a vee-two hub anyway with my "full monty" set-up.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.