Ducati.ms - The Ultimate Ducati Forum banner

Heated jacket etc 939

1108 Views 6 Replies 4 Participants Last post by  Uncle Brad
Is there an existing plug in socket for heated clothing on this bike - haven’t managed yo locate one yet. Thanks

my apologies if this is already cover- couldn’t locate a thread
1 - 7 of 7 Posts
Not sure if you have a HS or HM but if you have a Strada, you should have two outlets. If you have a Tard, you may be out of luck. Have a look at this image out of my 2016 HS owners manual. Notice the box marked 'C'. It shows you what you should be looking for. Now do a 'Where's Waldo' and find the letter C on the pictorial of the bike. Hard to find but there is one near the riders leg and the other under the passenger. Both are on the LH side. Cheers

Wheel Organism Font Art Auto part
See less See more
Great thanks.
I have the 2017 hypermotard- but I’ll take a look - hopefully I’ll find it.
much appreciated!
  • Like
Reactions: 1
Probably not the answer you're looking for, but a quick solution to get USB power is to use the charging pigtail with a Battery tender USB plug. I did that when I needed phone charging power on a trip that I did with my hyper. Maybe not a permanent solution, but gets you going anyways.

  • Like
Reactions: 1
good info
Many thanks!
Not sure if you have a HS or HM but if you have a Strada, you should have two outlets. If you have a Tard, you may be out of luck. Have a look at this image out of my 2016 HS owners manual. Notice the box marked 'C'. It shows you what you should be looking for. Now do a 'Where's Waldo' and find the letter C on the pictorial of the bike. Hard to find but there is one near the riders leg and the other under the passenger. Both are on the LH side. Cheers

View attachment 1062412
I bet they plugs are there. I followed the diagrams for a strada and found the same stock "grip heater" plugs on my motard. I doubt they run different looms within the 939 series.
I bet they plugs are there. I followed the diagrams for a strada and found the same stock "grip heater" plugs on my motard. I doubt they run different looms within the 939 series.
I'm in agreement with you that the looms should be the same. But after checking, the looms are different for the 2016 model. The HS has a more robust charging system than the HM which makes sense because of the additional outlets supplied. Ulitmately, by now, i'm guessing the OP has confirmed how his machine is configured and is wishing he bought a HS.;)
1 - 7 of 7 Posts
Top