[jasle]

OK going to make a tool like this one

Have Mig will travel.

Anyways what is the head torque spec for a 1997 900SS.

also what multiplier do i use for a 3" extension length?

Thanks.

 

[avocet]

use the wrench at 90 degrees and no correction required.

BUT, for those who are google impaired:

http://www.norbar.com/Calculators/TorqueWrenchExtensionCalculator/tabid/70/Default.aspx

 

[wdietz186]

As stated before use at 90deg. and no compensation needed.Torque in three stages and in a cross pattern at 10,20 and 30ftlb.I like to start on the exhaust side of the head closest to the port as it seems the area under tends to seep on that side when really hot.Pull smoothly and use mloy grease under the nuts and on the threads.

 

[jasle]

thanks...sorry I guess I missed the previous post about the torque...