Ducati.ms - The Ultimate Ducati Forum banner

Head lamp gremlins

1446 Views 6 Replies 7 Participants Last post by  amullo
I recently had the left hand control switch replaced on my 01 748 due to an accident. I've noticed that when I switch to high beam, the low beam light shuts off. Should'nt the low beam light stay on? When I depress the high beam flasher switch the low beam light stays on. What I did was to reinstall the original left hand control switch and noticed that the low beam light stay on when I depress the HB switch and HB flasher. Is there an electrical glitch in the new switch? Thanks for the help.

1 - 1 of 7 Posts
My 916 was like this when I bought it, I modified the wiring in the switch so that the low beam stays on when switching to high beam - only needs the wire moving to another contact in the switch, about a 10 min job.

1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.