Hey Everyone! May's Bike of the Month challenge is now open for entries!

Head lamp gremlins

1446 Views 6 Replies 7 Participants Last post by amullo, Apr 4, 2006

304rescue

Discussion Starter · Apr 3, 2006

I recently had the left hand control switch replaced on my 01 748 due to an accident. I've noticed that when I switch to high beam, the low beam light shuts off. Should'nt the low beam light stay on? When I depress the high beam flasher switch the low beam light stays on. What I did was to reinstall the original left hand control switch and noticed that the low beam light stay on when I depress the HB switch and HB flasher. Is there an electrical glitch in the new switch? Thanks for the help.

Raymond

Save

1 - 1 of 7 Posts

Chuckracer

· #6 · Apr 3, 2006

Yup, I modded my 749 switch so the low beam stays on when high is selected, so I have both beams on high.

To me, the stock headlights suck. It's not a power thing, it's a pattern thing. Having both on when in High Beam mode helps fill a huge hole the high beam alone leaves.

Save

1 - 1 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month