I'd like to replace the mirrors on my '92 SS. I would like better visibility than i get with the stock mirrors and i don't care for bar end mirrors. I have looked at many promissing generic mirrors from Ken Sean and Emgo in the Dennis Kirk catalog but i'd like to know if anyone has found some that work well to help me narrow down the choices. I beleive someone said the ZX-11 mirrors worked well. I'm not too concerned about hole or stud placement on the mount as i can make an adaptor plate pretty easily if needed. Thanks, George M.
"generic" mirrors
Join the discussion
Recommended Reading
-
How to remove seized Petrol tank cap locator?
SupersportThe piece that goes into the top of the petrol tank with the 8 little grub screws around it ( that the opening part of the petrol cap sits in ). It ( should ) has that green o-ring on it to seal against the tank, and then the weather seal at the top. Some brightspark DPO didn't have the weather...- 13
- 231
-
What have you done to/with your SS today?
SupersportJust checking to see what others are doing with their bikes right now. Since mine is new and I'm going down the customization path (busted up side fairings makes this easier than it would be if they were pristine), I'm doing maintenance, reading up on things I don't know about (plenty) and...- 1K
- 140K
-
potshot · updated
-
Low fuel weirdness
SupersportStarted up my '95 SS/SP this morning and noticed that it took more coaxing than usual to get it to idle. Rode around the neighborhood for a few minutes and found that while the engine ran, it would bog a bit when I'd whack open the throttle or shift into second. After about 5 minutes, my low...- 14
- 711
-
900SSie Front Indicator Recess Filler.
SupersportHi all, I'm wanting to fill in the front indicator holes on my 900SSie and use another indicator. Is there anyone who has a drillable plastic part that would do the job? I'd 3D scan it and 3D Print one, but there's no-one in my city (apart from the huge engineering firms) who have a laser...- 3
- 298
-
Kiwihame · updated
-
Wire diameter (gauge) to lengthen Ignitech wires
SupersportMight be a stupid noob question but I really don't know much about electronics so... Which wires should I use to lengthen the wires coming from an Ignitech ignition? I forgot to ask for a longer wire harnass when I ordered the Ignitech and now the wires are just a few centimeters to short to...- 15
- 549
-
BelgianDuc900SS · updated
Join now to ask and comment!