Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!

Front brake lever removal/swap

2066 Views 5 Replies 4 Participants Last post by  Fearless
I'm in the process of searching the forum and the web unsuccessfully for tips/instructions on how to remove the OE front brake lever to swap out a replacement. Not an upgrade, it was broken in a tipover. So, the short question is a request for a point out to a step-by-step or pics.

The current/initial issue is that I have the pivot pin out, and I gather that you need to remove the bushing/sleeve. But the back of the adjustment screw appears to be attached to the plunger on the master cylinder by a rubber boot. I can't tell how to get that apart, and don't want to eff it up any more.

Tips/instructions appreciated. Headed back into the garage.
1 - 1 of 1 Posts

· Registered
4,262 Posts
Check Youtube for videos, it looks pretty easy for my Monster, but it has been too hot to get motivated lately.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.