Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

205 Posts
Almost certainly the forks are not compatible. I dont have a set in pieces now to measure but I have never thought that there was excess meat on the fork SBK tubes.

Taking 1.5mm off the wall thickness of such a highly stressed part doesn't seem too good an idea to me.

Why not just fit the appropriate yokes and cut out the machining altogether?

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.