Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
I hear airplanes
Joined
·
2,601 Posts
Discussion Starter · #1 ·
I need the fork length measurements from the bottom triple to the center of the axle on a stock height SSSA monster.

I've swapped out the stock forks for worked over 1098 forks, but there is a slight problem in the taper on the forks, which is causing me to have to drop the triple down to 4 lines showing. I goofed and didn't notice this before I had the forks done, and goofed more because I can't find the stock monster fork measurement I wrote down in the first place!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top