Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!

flywheel torque spec issue

1519 Views 1 Reply 2 Participants Last post by  woodyracing
so i had some battery charging issues with my 01 monster 750... got a new batt still no go so i look into the stator... well thats it stator is burned. the nut in the center of the flywheel was loose the flywheel moved out and touched the stator and burned a coil. so i called a dealer and asked for the torque spec on that nut they said 162 ft lbs and the only way to get that is to have the holder tool (im assuming this is not the clutch holder tool) so i asked about buying a tool. $329... or not so does anyone know if this is the correct torque spec and if it is how do i get this without driving 3.5 hours to the nearest dealer??
thanks sebastian
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.