Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
129 Posts
I just did the extra brake light thing on my 2013 796, I use the Whelan Lin 3 light, ( I have put one of these on every bike I have owned in the last 5 years)

I tapped into the connector in the tool tray area. It is an eight pin Molex type that actually has only six positions used. Two grounds, a stop light, a running/plate light, a right directional and a left directional. It appears this is conventional and not a CANBUS as I had expected so it is easy to check and wire.

I would imagine our bikes are somewhat alike, if you find that connector post a picture or give me the colors on the wires
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top