Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2021 HERE!
1 - 2 of 2 Posts

·
Old Wizard
Joined
·
3,007 Posts
Evo is correct and being straightforward with you. The pushrod should rotate freely but shouldn't spin continuously. A common problem is when the pressure plate bearing seizes it spins the push rod continuously and will eventually cause the slave bearing to fail. Pull the pressure plate and replace the bearing. All will be well again.
 
1 - 2 of 2 Posts
Top