[artisto]

My left Rizoma grip (rubber part) is slipping down. I was thinking of using grip glue. Anyone else have this happen with Rizoma grips?

 

[brooksie]

Not having any problems. I used Loctite Blue on the set screws and hair sprayed the ID of the CLUTCH grip.

 

[YMRacing]

Not having any problems. I used Loctite Blue on the set screws and hair sprayed the ID of the CLUTCH grip.

When using hair spray, my choice too, use the lacquer type. I also safety wire my grips.

 

[TimDog]

no slips for about 10k miles on them

 

[brooksie]

When using hair spray, my choice too, use the lacquer type. I also safety wire my grips.

Be sure it's a non-perfumed type, PLEASE.

 

[papawheelie]

I had the friction screws back out before I used loctyte, but the rubber part is fine.

 

[Bly]

My throttle grip slipped bad.
The plastic inner core released from the alloy outer so twisting did nothing, very frustrating!
I pulled it apart, scored the aluminium with a file and glued back together with construction glue.