Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

7 Posts
Discussion Starter · #1 ·
Got a new ESR515 regulator/rectifier and want to make sure I install it on my '96 900SS/CR correctly. Looking at what I got (an RR51 was previously on the bike), I have to cut off the connector for the white & black wires and run the white to the + terminal of the battery and the black wire to the - terminal of the battery. The red wire goes to the red with black stripe coming from the wiring harness and the two yellow wires connect to the two yellow wires coming from the stator.

I know this seems pretty straight forward, but am I missing anything?

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.