[madd duc]

Hi all, I have a 2000 996S I bought used last fall. I love this bike. Has taken some getting used to but really love it. Just recently I noticed my high beams stopped working. Additionally the hazard lights wont work either. Ive checked fuses on right side fuse pannel. Ive ordered a maint manual and do not live near a dealer. Anyone had similar problems and if so what might be the cause. Im about to pull the bulb out and check it but Im thinking with the combination of the two issues its something electrical.

 

[94CobraR]

Turn signals is what you mean, right? Check the big black fuse next to the yellow one on the side of the battery. Did you install LEDs or anything? That's most likely the culprit.

 

[madd duc]

Thanks, Im gonna check it out. I do have LEDs. My turn signals all work fine and my low beam lights work. But at same time my high beams quit working, my hazard lights where all four turn signals flash at once, they quit too.

 

[DukeDesmo]

my hazard lights where all four turn signals flash at once, they quit too.

I didn't know 996 had hazard lights? 916 doesn't.

 

[94CobraR]

hazards = turn signals

 

[DukeDesmo]

hazards = turn signals

Yes but all 4 at the same time, do any 916 series bike have that?