Ducati.ms - The Ultimate Ducati Forum banner
1 - 1 of 1 Posts

· Registered
5,687 Posts
Discussion Starter · #1 ·
As mentioned in my ST2 thread, the PC that came installed is dead. I removed it and put the bike back together after finding that it starts/runs without issue in stock form.

I did some bench testing this evening and found that it WILL power up through the harness after all. But, that's all it will do. I had it powered from my 12V power supply through both the harness and the external port. Its LED will do the self-check bit either way. But, in trying to use my laptop to do anything with maps, it fails to see the PC.

So, who's successfully dug into these (literally, dug into the potting) and found a cause? Of those, who wants to try with this one?

Yours for the cost of shipping. I'll give this post until Tuesday night (trash is taken away Wednesday mornings).
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.