Joined
·
9 Posts
DUCATI SUPERMONO built by MCRR in Australia
- Status
1 - 4 of 4 Posts
Joined
·
950 Posts
This is so exciting!
Unfortunately I couldn't find any info in MCRR's website, and I am craving for details.
Joined
·
26,132 Posts
True Supermono replicas?
A silly dream of mine has always been to build a Supermono replica -- and actually copy the engine configuration of the original. I've seen countless Supersports with Supermono fairings, but as far as I know I've never seen anyone try and create one with a single-cylinder engine. There's an...
www.ducati.ms
1 - 4 of 4 Posts
- Status
Join the discussion
Recommended Reading
-
Old wheel on an 848 evo
SuperbikesHello all I’m in the middle of a project, basically trying to stick an 848 swing on onto an old 1984 yamaha xv920.. seemed like a good idea at the time! I’ve been researching wheels and think a five spoke would look much better on the old bike than the newer 848 10 spoke Marchesini wheels...- 9
- 604
-
999S Clutch swap
SuperbikesOkay Okay, I know, rookie shit. Just bear with me. My babied 999S is approaching 20K miles and it's been time to swap the clutch pack. I opted for the EVR 48T set (clutch plates and basket) as it seemed like a worthy upgrade from the stock setup. Upon acquiring the bike from its...- 3
- 573
-
DGJ · updated
-
-
999 clutch bleed issues
SuperbikesIf I do a ride of, say, 400 km on my 999 I've got to crack the bleed screw and let the air out. It's fitted with remote canisters, but it was the same issue before these. It doesn't seem to use fluid, and I'm not getting any leakage under the slave. I read somewhere, I think, that the master can...- 6
- 723
-
748 help
SuperbikesSo I came across an actual barn find. A rough Ducati 748 that needed to be brought back to life. So far I've done the following Replace all fluids. Hydraulics, oil, and coolant New spark plugs Tons of wiring I removed the throttle bodies and injectors and had them ultrasonic cleaned. When I...- 43
- 1K
-
Rpaint82 · updated
Join now to ask and comment!