Ducati.ms - The Ultimate Ducati Forum banner

Drilling out cases..

807 Views 7 Replies 6 Participants Last post by  duc96cr
I'm drilled out 95% of the case/engine mounting bolt so I can use 999/12mm bolts. There is 1" left that I can't reach with the bit that I'm using.

I know others have done this ....is there a longer but to use?

sent from my jitterbug
1 - 1 of 8 Posts
Buy a drill extension.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.