Ducati.ms - The Ultimate Ducati Forum banner
1 - 1 of 3 Posts

· Registered
169 Posts
Your idea of hooking into one of the fuel injectors may work pretty good.

You could even make a pretty good removable jumper harness with 2 parts off of a Volvo in a junkyard. Get one of the injector wire clipos with some wire, and the connector for the oxygen sensor off of the firewall. It has an injector plug on it. Cut the wires to length, and when splicing you can add your pick up wire and have a removable harness without cutting up the one on the bike.

At least that's what I came up with real quick....
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.