Ducati.ms - The Ultimate Ducati Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
A cycle cat pressure plate and open clutch cover were recently installed on my 749. I got caught in the rain yesterday but ran the bike after the rain stopped. Today I noticed a little rust on the springs. Anyone know if it's normal?
 

·
Registered
Joined
·
128 Posts
Spray some silicone on it...every other day...Just on the springs....and just enough to coat the springs...I use to run the open clutch covers..But I ended up changing to Carbon covers...But ..When I use to run open covers I had that problem and the dealership told me to use silicone spray every other day...
 

·
Registered
Joined
·
50 Posts
If the springs you are using are the stock ones they might rust same thing happened to mine, i got a stainless steel set from motowheels

http://www.motowheels.com/italian/myProducts.cfm?parentcategoryid=442%7CDucati%20Clutch%3A&productID=4205&showDetail=1&categoryID=444|Clutch%20Assemblies%20%26%20Parts&vendoridtodisplay=0&filterFor=&collection=168%7CEuropean%20Motorcycle%20Parts
 
1 - 3 of 3 Posts
Top