Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
207 Posts
I am actually in the middle of installing mine and waiting for my triple clamp to come back from the powder coater. I did drill mine for the control pins (small plastic pins on the turn signal switch and the kill switch). It is going quite easily so far (knock wood). I will report here when I get them completely on at the end of the week. Get some anti-seize lube as the installation requires it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top