Ducati.ms - The Ultimate Ducati Forum banner

crankshaft nut

2K views 2 replies 3 participants last post by  RedTop 
#1 ·
a phase-1 set up on my 748. is there an easy way to getting that crank nut off. i heated itwith a torch, scored the alternator by trying to keep the crank still, liquid wrenched it and nothing. advice?

...and will someone take my poison ivy from me.
 
#2 ·
You need a Ducati holding tool or a good impact gun. The nut is loc-tited on, so heat it, dont burn it. Then hit it with the impact and it should come off without using the holding tool.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top