Joined
·
1 Posts
I'm having some issues getting this off with an air impact wrench. Can someone confirm this is a right hand thread? I'm replacing the starter sprag clutch.
Thanks,
John
Thanks,
John
Crank/Rotor Nut - 96 900SS
Join the discussion
Recommended Reading
-
Maxed out on closer shim thickness on my 94 900SS
SupersportSo while I was just trying to relocate my oil cooler above the cylinder head as a bit of a covid timewaster project, I thought I'd measure the valves while the covers were off, even though I did it 2000 miles ago. To my surprise both closers and openers on the horizontal cylinder were out of...- 6
- 435
-
Lelebebbel · updated
-
Electrosport reguglator/rectifier is not plug and play, quite
SupersportJust bought a new one, model ESR515, for my 1997 SS/CR. Supposed to plug right into the wiring harness. Be aware, it doesn't. Male plugs to alternator females way too small, won't stay in. Male plug on power line to battery way too small, no way it will fit into the female end from the...- 63
- 3K
-
Tensioner Bearing Type
SupersportHi folks. New to the group so I apologize if this topic has already been discussed. Just bought a '93 900ss and found that one of the belt tensioner pulleys was seized. In talking to a local bearing supplier, they recommended a metal "shielded" bearing over the typical sealed bearing for high...- 3
- 159
-
Speedo gear wheel spacer/drive
SupersportI’m need some help with identifying the right speedo gear hub driveplate (5). It’s a’94 SS but with 5 spoke Marchesini wheel and pictured drive gear (I think of a ‘95 CR). What is missing and where can I source it? Thanks for the help! Sent from my iPhone using Tapatalk- 3
- 142
-
Supersport high level pipe brackets
SupersportI have just received a set of Ducati Performance by Remus pipes that need repair which I am going to rebuild. The big problem is that they are minus both the brackets required to fit them. Has anybody got a decent set of photos of both brackets. I can easily get the ones from the frame to the...- 8
- 310
Join now to ask and comment!