Ducati.ms - The Ultimate Ducati Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
58 Posts
Discussion Starter #1
New guy back again with his clutch maintenance. I pulled the pressure plate, all the disks and the spindle to check for wear. You guys were kind enough to provide info on my pressure plate wear. I kept all the plates in order and will be ordering new friction plates and a new clutch basket since its too wide at the slots and pretty "notchy" looking. After I reinstalled to keep things together before I order parts, the clutch lever doesn't move more than about a quarter inch and it's very stiff. The pressure plate also moves the same distance. What did I mess up?

Thanks
 
1 - 2 of 2 Posts
Top