Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!

1 - 2 of 2 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
Hey folks,

I posted this question on multistrada.net and I'm hoping someone here might have an answer.

Does anybody know the width of the tab on an OEM clutch plate? I bought the DP clutch pack [964060AAA] and it doesn't fit my MPL basket because the tabs are too large. I had a Barnett in there and there were no fitment issues.

Alternatively, if you know how wide the slots for the clutch tabs are on an OEM basket, that would help too.

Thanks.
 

·
Registered
Joined
·
27 Posts
Discussion Starter #2
Problem solved. Sort of.

After taking the basket out and taking a closer look, the tech and I discovered the titanium inserts on the fingers of the basket had started to move in their housings. As a result, the inserts were stuck at an angle in the fingers and were slowly grinding off the clutch tabs. It also prevented a new set of clutch plates to slot in.

So goodbye MPL, hello Barnett.
 
1 - 2 of 2 Posts
Top