Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello,

I purchased my 1098 in the US, but was recently relocated to Germany. I have read through the manual and don't see any steps on changing the LCD display from US to metric. Being an all digital display, I really hope this is a simple switch that I have just over looked somewhere.

Thanks,
Adam
 

·
Ducati Acolyte
Joined
·
818 Posts
Found this info on Ducati Spot, let me know if it works out :)
http://www.ducati1098.net/forums/showthread.php?t=511&highlight=SWITCH+LCD+DISPLAY

Push the upper part of the control Button and turn the ignition on,
use the lower button to change setting till you reach "SET UNIT",
push the lower button for several seconds,
now choose the country: EU, UK, USA, CND, JAP, FR,
push the lower button till the display shows MEM,
Turn the ignition off
 

·
Ducati Acolyte
Joined
·
818 Posts
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top