Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 4 of 4 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
Got the rest of my 996 ready to go and was flushing the (dirty) fluid from my coolant lines. Decided to open the water pump and found this. Is there a product or some mixture I can flush the system with before adding distilled water and WW to it? Bike sat for 2 years.
 

Attachments

·
Registered
Joined
·
1,532 Posts
I bought it but haven't used it yet; there are radiator flush systems/fluids at your local car supply store.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
253 Posts
I think I'd pull the radiator and hoses to better flush out your system. Make sure you clean as much corossion out as you can, then reassemble and flush again at least once. Then fill with coolant and distilled water and check it on an annual basis. Good thinking to pull that cover as well!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top