Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hey guys. I have a Brembo p32 caliper and corresponding master cylinder. I do not have the lines that connect the two or connect the reservoir to the cylinder pump. Where can I purchase this? I only need the lines. I have the rotors, pads, caliper, banjo bolts, rear master cylinder and reservoir. I need the lines for the caliper to master pump, then from the pump to the reservoir
Your help is appreciated ! I put this brake system on my cb750
 

·
Registered
Joined
·
61 Posts
Just make a brake line. You can buy two 10mm brake fittings at whatever angle you need them to be and then buy a universal braided line in whatever length you need
 
1 - 2 of 2 Posts
Top