Ducati.ms - The Ultimate Ducati Forum banner

21 - 23 of 23 Posts

·
Registered
Joined
·
300 Posts
Discussion Starter #21
Ok I got it!

Wires from LED Brake light:
Red, Yellow, Black

Wires from OEM brake light:
Red/Grey, Yellow, Black.

Here is how its works:

Red to Red/Grey, Yellow LED to Black Harness, Yellow Stock harness to Black LED.

Ah, finally, Thank you so much guys. Especially Reh

Here are some pics (FYI: I have not idea what I want to do for blinkers, so for now I just stuck some LED's on the License plate mounting screws)




 

·
Premium Member
Joined
·
521 Posts
Glad to hear you got it sorted out.

Looking good.

Cheers

Rob
 

·
Registered
Joined
·
36 Posts
I got a similar problem with my Led integrated tail light on my Streetfighter 1098.

I bought it from ebay. Chinese propably.
It has an oem-like connector for the brake light that works fine.

On the other side, it has 2 yellow cables, 1 for each turn signal.
The bike has 2 cables for each turn signal.

I connect the yellow cables with one of the cables coming from the bike and they blink right BUT when I turn the signal switch of, they remain lit amber.

Even with barracuda 10w resistors.

What can I do?
 
21 - 23 of 23 Posts
Top