Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

2,255 Posts
I did 2 on some 900SS triples. I just used a pair of pry bars and small wood blocks. The race isn’t on there all that tight.

I pried on the roller cage about 180 degrees apart using the wood blocks as fulcrums and both popped off in the same manner with only a modicum of force required.

Easiest bearing removal I’ve done in a long time.....sean
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.