Ducati.ms - The Ultimate Ducati Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
64 Posts
Discussion Starter #1
The previous owner of my bike was in the process of fixing a few things on the bike and lost some bolts.. Can anyone give me the sizes of these? If I had the thread size and length I can get replacement hardware...

Front Fork "Pinch" Bolts:

Front Caliper Bolts:

Left engine side cover bolts:

Starter bolts (long ones that hold the starter together:

Thanks,
risk
 

·
Registered
Joined
·
371 Posts
According to the manual, I think the front caliper bolts are 10 x 1.5, the fork pinch bolts are 8 x 1.25, "starting gear pin screws" are 6 x 1, but I can't find anything in the shop manual for the left side engine screws.

Hope this helps. If I put down any misinformation I apologize. Maybe someone can verify?

Jeff
 
1 - 3 of 3 Posts
Top