Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter · #1 ·
The ST2 tacho became erratic some months ago and finally quit working altogether so after reading some of the threads posted here I pulled the dash out , cleaned and tightened the brass thingys on the back and cleaned all of the electrical connections. After I put it all back together and before I put the fairings back on I started it up. The dash worked as normal but the tacho was still dead. Too bad, I needed the bike for work on Monday so I put her back together and started it only to discover the dash is completely dead along with the tail light. I have now had it apart again, checked all of the connections and fuses and can't find any reason it won't play. Does anyone have a clue? :confused:
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #3 ·
Mark, she's a 350 but the new girl on the bench is a hot as eff 500 red hunter girder forked bobber. Can you believe Iv'e got a 1948 British bike with less electrical problems than my 97 Duke. Any thoughts on my ST2 gremlins guys?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top