Ducati.ms - The Ultimate Ducati Forum banner

a little brake question

1248 Views 3 Replies 3 Participants Last post by  ess-ess
I just got a new (to me) 1996 with the single pin front brembos and after removing the cotter pin that secures the single pin in, The pin won't budge!
Well, I can spin it, but can't push or pull it out.
I don't have a shop manual and am feeling pretty stupid. I've changed pads on my previous ducs but they're the 2-pin design.
Any tips on getting the pads out?

Buddy :confused:
1 - 2 of 4 Posts
Thanks guys! :)
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.