Ducati.ms - The Ultimate Ducati Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Looking to see if anyone has had any good experience with anything other than sharkskinz...

and best/cheapest places to purchase good race plastic...

Currently am looking at the 999 full set from section8superbikes, but since i have a biposto, i likely won't use the tail....
 

·
Registered
Joined
·
172 Posts
Actually, i'm in the same boat

I'm also looking for some race plastics but will most likely swith the tail off and on depending on the occassion as I do sometimes give short rides on the back. The mono should fit on the biposto subframe no problemo from what I hear.
 

·
Registered
Joined
·
16,908 Posts
We just got a batch of Ducati fiberglass pieces that are kevlar reinforced and made in a vacuum bag. They are almost as light as the CF panels of the 999R.
The appear to be fairly strong and do not have excessive amounts of gel coat or resin. They are made with a shallow belly pan. These are the 2005 style 999R style body panels with the slightly wider nose and new design side 'wings". These are not the cheapest but it is very good quality compared to what I have seen from the others.
 
1 - 3 of 3 Posts
Top