Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
1,621 Posts
The stacks on my 916 were stuck, so I used an oil filter wrench to get more leverage. I simply put the strap of the wrench around the largest diameter on the velocity stack and rotated it off. The little spring clip engages when the stacks are tightened all the way. What is holding the stacks from rotating are the o-rings that seal them. They probably got dryed out and making it difficult to turn the stacks. Make sure you grease them up when reassembling them.

Mike
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top