Ducati.ms - The Ultimate Ducati Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter #1
So now the pistons are off checked the ring end gap in 4 places along each the jugs and all are in speck. Now cleaning the valves, is thier a easier way than scotch brite and brake clean, I did soaked them in injector cleaner first.I do need to replace 2 rockers all the others looked OK. Bike has 17000 miles on it so am happy with that. Does any one know where I can get a set of silicone hoses as the old ones are just that old and need replaced. The more I work on this bike the more impressed I am with the mechanics of the bike.
 

·
grand poobah
Joined
·
689 Posts
Ducs are things of beauty onthe inside as well. The silicone sets almost never show up on ebay or even here. I have seen one set for sale in the last two years. They can be obtained from motowheels. Samco and sbs are the only companies I have seen make these. Moto is an advertiser here just hit his link. Best Wishes Brad
 
1 - 3 of 3 Posts
Top