Ducati.ms - The Ultimate Ducati Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hi,

I just picked up a nice 99 750 Supersport to knock around with and will be using it for some longer rides.. problem is, I had ridden a later one and this 99 has the lower bars on it and being 6'3" that's not too comfortable.

Any suggestions on some clip ons? I searched the forums and didn't see anything conclusive.

Thanks in advance!
 

·
Registered
Joined
·
207 Posts
You'll want anything with less drop/angle than the stock clipons. Which is... just about any other 50mm clipon than the stock ones.

Problem to watch out for is you can't fit the versions w/ a lot of rise on these bikes without your hands or controls hitting the upper bodywork.

Speedymoto makes nice ones, Heli makes some, LSL makes some... etc.
 

·
Registered
Joined
·
28 Posts
fast by ferrachi has some with only 2 degrees of down angle
i have contacts with a machinist in reno who will make them whatever angle you want for less than 100 a pair
 

·
Registered
Joined
·
4 Posts
Discussion Starter #4
Thanks guys!

I probably should have posted an intro.. I haven't ridden in over 6 years, I want to get my old 996S out of storage, but picked up the 750 to get my bearings back before I get back on a superbike.

Bill
 
1 - 4 of 4 Posts
Top