Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter · #1 ·
I noticed something odd while working on my bike yesterday.

When I removed the synch port screw on the left side of the rear cylinder throttle body, the idle quickly jumped. I expected this to happen because it has the same affect as opening up the idle screw.

When I did the same thing on the forward cyclinder, there was no change in RPM.

Something doesn't seem right here. Any ideas?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top