Ducati.ms - The Ultimate Ducati Forum banner

916 ride height tool cad or sample

939 Views 1 Reply 2 Participants Last post by  nyckreyna
Hi All,

I'd like to make a 916 ride height tool on our cnc machine. If someone has cad drawings or a tool they'd like to lend I'll draft it up and machine a bunch out of acrylic and give them away. I can probably get 30 or so out of a 4'x8' sheet. If I can get either the drawing or a tool to borrow, I'll post and then take names and shipping addresses to send them out. My thought was clear 1/4' acrylic would be ideal.
1 - 2 of 2 Posts
If I had what u needed I would love to help. But if u get it done I'll pay for one. I'll do some looking around and see if I can't find what u need.

Sent from my iPhone using MO Free
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.