916 adjustable pulleys
Join the discussion
Recommended Reading
-
High Voltage After Motoelectric Kit 749S
Tech ForumI added the Motoelectric Hicap kit to my 2005 749s, everything was simple, I left the bike running and got an engine light, with voltage showing H on the dash. Any tips or is this common? Voltage was fine prior. I'm going to check the actual voltage with a meter tonight after work. I checked...- 2
- 303
-
Low compression m900ie
Tech ForumHi, i repeated a compresion test: 105psi front 95psi rear Same hot or cold, wide open throttle. 44000km On previous test at 29000km i had exactely the same numbers. Almost no oil consumption over any change interval (6000km) Valve clearance always 0 for closer and 0.10mm opener. Cam timing not...- 7
- 350
-
Shop Manual for 2017 MTS 950?
Tech ForumWell, I couldn't figure out how to put this in the Service Manual thread, so I am giving it a stab here... I am looking for a shop manual for a 2017 MTS 950... Can anybody help? My immediate task is pulling off the front faring to install oil cooler and radiator guards. Thank you!- 0
- 102
-
Service/Workshop Manuals
Tech ForumThanks to all the folks that have contributed to these over the years. If you have a service manual and would like to share it, we encourage you to add it to the thread. If you need help with this, please contact a Moderator. [And a BIG THANKS to tonered for putting it all together in the first...- 63
- 114K
-
tonered · updated
-
Supermono Engine Project based on 1098
Tech ForumHello everybody, I have a "Supermono" project Not realy a Supermono but a low budget single cylinder based on 1198 engine (rear cylinder without heads and drilled piston) For the moment I just have : 1098 crankcase 1x 1198 front head and cylinder/piston 1x 848 cylinder/piston 1000DS...- 35
- 3K
-
SamC · updated
Join now to ask and comment!