Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
1,527 Posts
not a simple parts switch. the steering tube is larger on the 748, allowing the necessary pieces to fit inside. you would have to have a head tube and innards off a 748, cut off the same from your bike and weld on the 748 tube. all the time maintaining perfect alignment. not to forget that the serial numbers are on the tube and you just messed up your DMV paperwork.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top