Ducati.ms - The Ultimate Ducati Forum banner
1 - 1 of 17 Posts

· Registered
92 Posts
I have a Givi Monokey v46 top case and the touring side cases from Ducati that came with the 3 matching lock cylinders. Unfortunately the Ducati/Givi lock cylinder was not compatible with the Givi lock cylinder. Different length and diameter.

The Givi lock cylinder was simple to remove. Just a couple of Phillips head screws to remove from inside the case to remove the locking mechanism.

1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.