Ducati.ms - The Ultimate Ducati Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
Brought a full set of pads for the Multi, was sent EBC FA209 for the rear, does not work. Any one know the correct EBC HH pad for the rear on the Enduro.

Thank you all, I searched around but could not find an answer.
 

·
Registered
Joined
·
150 Posts
Not sure the above post is for the ENDURO...the regular MULTI and ENDURO have different calipers.

I ordered:

EBC FA209 > Rear


EBC FA630 > Front



I installed the rears about 18 months ago, seemed to be prefect fit?

Haven't installed the fronts but have matched pad via removing OEM and holding next to new pack.

The HH and 2V is just related to the compounds.

Update: the FA181 look to be the same apart from be a mono style pad.

 

·
Registered
Joined
·
27 Posts
Discussion Starter #4
I'll pull the pads and show how different they are at the weekend. FA209/2HH not even close to being the same. Fronts were fine with FA630HH, so I'm thinking maybe the FA181HH is the pad I need to buy?
 

·
Registered
Joined
·
180 Posts
According to the 2017 Enduro manual the Ducati part numbers are as follows:
Front: 61340121A PADS PAIR
Rear: 61341161A REAR BRAKE PADS SET

Here's an EBay pic of the FA181HH. It has a centre line gap; not the same as the one in your pic. One is probably a pirate.
979814
 
1 - 6 of 6 Posts
Top