Ducati.ms - The Ultimate Ducati Forum banner

1 - 1 of 1 Posts

2 Posts
Discussion Starter #1
My first post, sorry for any etiquette violations. I did search before starting new thread.
I have a 2015 Diavel that had an aftermarket backrest that required removal of the stock turn signals / brake lights.
I removed the backrest and reinstalled the factory signals, which plugged in nicely to where the after market signals had been plugged.
The back rest had separate turn signal and brake light where the factory lights serve as both.
The problem is that now if the turn signal is on, the signal lights quit blinking if the brake is applied (light stays on while brakes are used)
Any suggestions to remedy this situation are greatly appreciated!!
1 - 1 of 1 Posts