Ducati.ms - The Ultimate Ducati Forum banner

1 - 6 of 6 Posts

·
1st Gen Hyper Hooligan
Joined
·
2,326 Posts
Discussion Starter #1
Good day all and thank you for your interest.

Below you'll find a cherry of an example. The pride and joy of my garage since early 2014. Originally a Texas bike, bought with 2k mls, it was brought to sunny Northern California where the subsequent 20k miles of its exciting and meticulously maintained life was spent. In 2017 I deployed out of Travis and was given orders to Wichita Kansas when I got back where the bike now resides. Feel free to ask for vouches, plenty of them on this website.

Please see below for a list of top shelf parts that have been added, as well as all servicing done during its lifetime. Keep in mind, any reciepts I have and a box full of stock OEM parts are included. Disclaimer, the tank does not have any bumps but has exhibited swelling signs. Two of the fairing screws were found to keep spinning. This was found out during Rapid Bike Install (Tank removal required). Dealer was advised but the process to get it replaced was too lengthy at the time and havent revisited the issue since coming back to the US. If you have any questions, feel free to msg me. Can also include my email and number for those interested.

There were no expenses spared when it came to making sure the bike ran like a top. $9.8k takes it all. There is wiggle room for those with accommodating budgets but stock parts will begin to replace high end mods to make up for it (within reason). Additional photos on demand available. Bike stays under moto cover when not in use and during winter.

Motorcycle is now located in Wichita, KS.

May 2014 - Motorcycle Purchased from Harley Davidson of El Paso, TX
May 2014 - Frame Stickers removed and stored
Oct 2014 - 7500m Oil Service by Dealer
April 2015 - Trackday Purchased Group (C) Thunder Hill, Willows, CA 2015
May 2015 - Throttle cable TSB performed by Dealer
Dec 2015 - 15k Mile Service(Belts, plugs, valves included)
Sep 2017 - Fork Seals replaced and Brake and clutch bled
May 2018 - 22500m Oil Service performed

Exterior;
-COX Radiator, Oil Cooler, & Case Guard Set
-Evotech Performance Ducati Multistrada 1200 Tidy Tail
-Givi Tanklock Bike Specific Flange
-Givi ST602 Tanklock Tank Bag
-RAM-B-367U Motorcycle Handlebar Clamp Base with 1" Ball & M8 Screws
-T-Rex Frame Sliders
-Givi Side Bag Frames
-Wolfman Universal Saddle Bag Straps
-Wolfman Expeditionary Saddle Bags
-Tech Spec tank grips
-Palmer Adjustable Screen Adapter
-Medium CalSci Windscreen
-Shorty CalSci Windscreen
-Eagle Hiss Flaps
-Carbon Fiber Beak
-Blacked out bash plates
-Sargeant Seat w/ white piping
-Givi Top Case mount
-Givi Monokey V46 Top Case w/ matching color inserts
-DP Crash Bars
-eBay lever controls
-CNC Rearsets
-Powercoated black passenger rearsets
-Rizoma bar ends
-Rizoma Water Pump guard

Electronics;
-Powerlet Outlet (routed to clutch side fuse box)
-Ducati Multistrada 1200 Performance LED Signal Mirror Set Mirrors
-IPF Hi/Lo 6k LED H11 Headlight Bulbs
-Rizoma Rear turning lights
-Blaster X rear integrated tail light
-New 02 sensors
-Rapid Bike EVO for 2012 Multistrada 1200
-Denali Air Horn
-Shorai lighweight Battery

Performance;
-MW Tuning/Rexxer ECU Ducati Remap
-BMC Performance Air Filter: Race
-CORSE DYNAMICS Oil Fill Plug M20
-Arrow Headers
-Acrapovix Muffler

Suspension/Wheels;
-EBC Double-H Sintered Rear Brake Pads
-M50 Monobloc 1098s Calipers (powder coated)
-Speedymoto Front and rear axle sliders

-525 Conversion Kit (Quick Change) 15T front 42T rear Gold Chain (Hyperflex Cush Set)
-Brake Line Kit from Speigler Performance
-Racetec 205lbs Rear Spring upgrade (helped squat while riding w/ pass)
-Racetec 205lb Front spring upgrade (reduced dive during hard braking)
-Ohlins upgraded SCU
-Marchesini 3 spoke lightweight wheels
-PR4 GT w/ 5k miles

If you made it this far, let me just commend you and say there are missing items. Will update with time.
Thank you very much and have a great day!

-Carlo
 
1 - 6 of 6 Posts
Top