Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
So i have been restoring my baby (06 Sport 1000 with a 98 mm bore kit) that I have owned for aprox 4 years now, and after taking everything apart (including all spokes off and polish), got to the motor, which has all the clear coating on the heads showing cracks and fading, so I decided with a help of a very good mechanic friend of mine to fix it.
Took the whole motor out, got the cylinder heads off only to find a big scratch on the horizontal sleeve and piston.
All the parts are from Ducati, so I am trying to find out what parts were used (or what model Ducati were they taken from) so i can rebuild it the right way.
Would appreciate any help.
The back of the piston shows 98-21
Thank you


977397




977396


977394
977395
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top