Ducati.ms - The Ultimate Ducati Forum banner

2001 748R repair questions

7626 Views 38 Replies 12 Participants Last post by  spdrcr
2
New to the forum. I have a 2001 748r with all the goodies, factory pro chip, full exhaust, etc and unfortunately the rain got the best of me a few months backside and slide on the side damaging fairings, windshield, gas tank, etc.

I am having it repaired, painted and need to find out where to get the stickers for the fairings, the tank, and the seat striping (see pics...these are before the wreck).

Also, need to find screws for the windshield and the "rivets" that connect the upper fairing to lower.

Appreciate any help, really want to get her going again.

Thanks,

Chris

Attachments

See less See more
1 - 2 of 39 Posts
croc-man, i really like your style. you take no prisoners...:)

as far as i've read, the american 748r's of 2001 and 2002 got the öhlins steering damper. us europeans had to suffice with the ol' bicycle pump.

i've owned a 2000 748r a few years ago and now also a 2001 748r, as i couldn't stay away anymore.

the 2000 yr model had no number plate on the steering head. the 2001 and 2002 yr models do. as goes with the öhlins front and back, 4 pot calipers and carbon fiber airbox.

i seem to remember the 2001 yr model also had another frame up-date, but can't remember where i got that from. ??? or was that just the airbox making the whole frame stiffer?

i had my 2000 yr model on a reference dyno bench, and she put out just a sneeze less than 100 bhp on the rear wheel with an open (supplied by the factory) exhaust and the factory-adjusted chip (which would suggest something like 110 bhp in the engine).
croc-man, i really like your style. you take no prisoners...:)

as far as i've read, the american 748r's of 2001 and 2002 got the öhlins steering damper. us europeans had to suffice with the ol' bicycle pump.

i've owned a 2000 748r a few years ago and now also a 2001 748r, as i couldn't stay away anymore.

the 2000 yr model had no numbered plate on the steering head. the 2001 and 2002 yr models do. as goes with the öhlins front and back, 4 pot calipers and carbon fiber airbox.

i seem to remember the 2001 yr model also had another frame up-date, but can't remember where i got that from. ??? or was that just the airbox making the whole frame stiffer?

i had my 2000 yr model on a reference dyno bench, and she put out just a sneeze less than 100 bhp on the rear wheel with an open (supplied by the factory) exhaust and the factory-adjusted chip (which would suggest something like 110 bhp in the engine).
1 - 2 of 39 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top