I haven't ridden my 1098s in almost 2 months, and I took it out this past sunday. Everything was fine, except the brake seemed spongy and not as tight as i thought it used to be. I also noticed that both resoviors looked full to the max. I bled the brakes today, and really didn't notice any air at all. so I removed the caps, and the seal on the brake was pulled all the way down, so I fixed that, and then the clutch was so full, that after I removed the cap, it leaked out a bit. Not sure what is going on. Any ideas or help would be appreciated.
1 - 4 of 8 Posts
80 views and no help.:think:
I didn't try bleeding from the topIt either needs bled or your master is bad. Bleed it front the top, bottom, tap on it, curse at it, threaten to install it on a GSXR. If none of those help then it is time for an upgrade.
t_bare
I bled it from the top and it fixed the issue completely. Thanks
1 - 4 of 8 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Ducati.ms - The Ultimate Ducati Forum
A forum community dedicated to all Ducati owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, superbike racing, maintenance, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
Join now to ask and comment!
